DENSO’s develops world’s first driver side A/C system


DENSO Corporation has developed the world’s first automotive air conditioning (A/C) system that is capable of heating/cooling the driver’s area only. DENSO’s new system can separately control the climate in three different cabin zones, the driver, front passenger and rear seat areas, which can help improve overall fuel economy when the A/C is on.

“With DENSO’s new A/C system, the heating/cooling can be off in unoccupied areas, and temperature can be individually adjusted according to personal preferences when more than one area is heated or cooled,” said Akio Shikamura, senior executive director of DENSO’s Thermal Systems Business Group. “When the driver side A/C is being used only, the A/C system can save up to approximately 20 percent*1 energy consumption on an annual basis compared with conventional models, which helps improve the vehicle’s fuel efficiency.”

How it Works:
As in-dash space is limited, it is important for DENSO’s new system to maintain the same size level as a conventional A/C system. With this in mind, the company developed a new internal structure for the heating, ventilation and air-conditioning (HVAC) unit. To separately control the climate of each area, DENSO divided the internal structure into five compartments with each compartment connected to specific air vents: the driver’s dashboard and the driver side front window, the driver’s legs; the front passenger’s dashboard and front passenger side front window; the front passenger’s legs; and, the rear seat.


DENSO conducted repeated tests and simulations in various conditions to provide the optimum climate control*2 and maintain occupants’ comfort even in severely hot and cold temperatures.

When an A/C system is in heat mode, it uses a large amount of outside low-humidity air to ventilate the cabin and to prevent window condensation. Previously, the same amount of cabin air was lost externally. However, DENSO’s new system only uses outside air for the driver and front passenger’s dashboard and front window vents. Compared to conventional products, this reduces the amount of warm cabin air lost by half, which also helps to reduce the amount of energy needed to operate the A/C.

The new A/C system was launched in the Japanese market and in other regions of the world earlier this year.

DENSO Corporation, headquartered in Kariya, Aichi prefecture, Japan, is a leading global automotive supplier of advanced technology, systems and components in the areas of thermal, powertrain control, electric, electronics and information and safety. Its customers include all the world’s major carmakers. Worldwide, the company has more than 200 subsidiaries and affiliates in 35 countries and regions (including Japan) and employs approximately 120,000 people. Consolidated global sales for the fiscal year ending March 31, 2011, totaled US$37.7 billion. Last fiscal year, DENSO spent 9.3 percent of its global consolidated sales on research and development. DENSO common stock is traded on the Tokyo and Nagoya stock exchanges. For more information, go to www.globaldenso.com, or visit our media website at www.densomediacenter.com.

*1: The figure is based on on-vehicle tests conducted by DENSO.
*2: Depending on the cabin or external air temperature, this system may provide climate control in the front passenger and rear seat areas even when the vehicle is occupied only by the driver.

The Mobile Air Conditioning Society’s blog has been honored as the best business to business blog in the Automotive Aftermarket by the Automotive Communications Awards and the Car Care Council Women’s Board!

When having your mobile A/C system professionally serviced, insist on proper repair procedures and quality replacement parts. Insist on recovery and recycling so that refrigerant can be reused and not released into the atmosphere.

If you’re a service professional and not a MACS member yet, you should be, click here for more information.

You can E-mail us at macsworldwide@macsw.org or visit http://bit.ly/cf7az8 to find a Mobile Air Conditioning Society member repair shop in your area. Visit http://bit.ly/9FxwTh to find out more about your car’s mobile A/C and engine cooling system.

The 33rd annual Mobile Air Conditioning Society (MACS) Worldwide Training Conference and Trade Show, Be the Best of the Best will take place February 7-9, 2013 at the Caribe Royale, Orlando, FL.

Advertisements

About macsworldwide

Mobile Air Conditioning Society (MACS) Worldwide Founded in 1981, MACS is the leading non-profit trade association for the mobile air conditioning, heating and engine cooling system segment of the automotive aftermarket. Since 1991, MACS has assisted more than 600,000 technicians to comply with the 1990 U.S. EPA Clean Air Act requirements for certification in refrigerant recovery and recycling to protect the environment. The Mobile Air Conditioning Society (MACS) Worldwide’s mission is clear and focused--as the recognized global authority on mobile air conditioning and heat transfer industry issues. www.macsw.org
This entry was posted in Uncategorized and tagged , , , , , , . Bookmark the permalink.

One Response to DENSO’s develops world’s first driver side A/C system

  1. James Mac says:

    A very nice article. Great to know about the system.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s