Over the road: Auxiliary power unit engine cooling systems


By: Joey Rosato, Director of Marketing at Texas Truck A/C, Inc.

Joey Rosato,
Texas Truck A/C, Inc.

As time goes on, Auxiliary Power Units (APUs) continue to play a larger role in the over the road trucking industry. Idle laws that vary state by state are placing restrictions on drivers across the nation. Because overnight idling to run the OEM AC system is now illegal in many places, the installation of an APU is required. Diesel APUs are the most popular solution to these restrictions, as they can provide heat, air conditioning, battery charging, coolant warming, and electrical power capabilities to drivers. These units are powered by small diesel engines, which can be run for extended periods of time while drivers are resting.
Extended run times create a unique challenge in keeping these diesel engines cool. APU engine cooling systems are not as complex as their automotive counterparts, but they operate in nearly identical fashions through the use of water pumps, cooling fans, thermostats, and various sensors/switches that collect data for the control module. The control module then uses the collected data to shut the engine down in low coolant, or high coolant-temperature conditions. Most APUs have fault code storage capabilities, and will display a fault code when these issues arise.
Without the proper function of these cooling systems, APUs are known to fail while displaying overheat codes, which render entire systems useless. A problematic component that often contributes to cooling system failure is the electric radiator/exhaust fan, which is known to succumb to wear and tear over time. Extreme vibrations and extended run times assemble to create a reduced life for components of this sort. One of the most common, but often overlooked signs that an electric fan is going bad is a reduction in RPMs. This can be caused by overheated/corroded wiring, faulty relay contacts, or simply a fan that is on its way out. The best course of action once an issue of this sort arises is to ensure that the fan has solid power and ground, all blades are intact, and a direction of rotation aligns with OEM unit specifications. If an electric fan checks all of these boxes, but doesn’t function properly, it’s likely time for replacement.
When changing this component, it is important to carefully select the proper OEM replacement, or equivalent to ensure component specifications are satisfactory. If the rotation of the replacement fan is not correct, the unit will overheat. Attempting to turn a “pusher” fan into a “puller” fan, or vice versa, by reversing the component polarity is a faulty practice, as the fan blades are designed to turn a specific direction for maximum output. This error commonly results in reduced airflow and component life. Best practices while installing the appropriate replacement part include the replacement of the fan relay, and any corroded electrical connections.
After necessary repairs and part installations are complete on the new electronic fan, it is important to check for possible secondary problems caused by the previous, faulty component. Issues to check for include coolant leaks, the necessity of a flush or refill, water pump belt/radiator cap condition, radiator/condenser cleanliness, and well-maintained electrical circuitry across the system. Making these checks after completing necessary repairs will help safeguard the proper function of the APU engine cooling system, and ultimately the entire unit, ensuring that over the road drivers can rest comfortably.

About macsworldwide

Mobile Air Conditioning Society (MACS) Worldwide Founded in 1981, MACS is the leading non-profit trade association for the mobile air conditioning, heating and engine cooling system segment of the automotive aftermarket. Since 1991, MACS has assisted more than 600,000 technicians to comply with the 1990 U.S. EPA Clean Air Act requirements for certification in refrigerant recovery and recycling to protect the environment. The Mobile Air Conditioning Society (MACS) Worldwide’s mission is clear and focused--as the recognized global authority on mobile air conditioning and heat transfer industry issues. www.macsw.org
This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.